Metal Restoration System

Metal Restoration System

Metal Restoration System

Overview

Overview

Overview

A metal roof has thousands of potential leak locations. From failing lap sealant to worn out washers on fasteners, an older metal roof can sometimes become a leaking nightmare.


The metal restoration system uses a unique 5 step process to address all the problem areas on a metal roof, sealing it up tight and providing permanent rust protection

Step 1.

First, we neutralize any existing rust with rust-off cleaner and pressure wash the entire roof.

Step 2.

Step 1.

Next, we apply Metal Encase rust-inhibiting metal primer to prevent future rust and corrosion.

First, we neutralize any existing rust with rust-off cleaner and pressure wash the entire roof.

Step 2.

Next, we apply Metal Encase rust-inhibiting metal primer to prevent future rust and corrosion.

Step 3.

For the third step we apply fastener grade caulking to seal all fastener heads and weak points on the roof. This seals gaps and provides further protection.

Step 4.

In our final preparation step, we seal all lap joints with a thick acrylic coating reinforced by an embedded layer of tough polyester fabric,

Step 5.

Finally, we apply Conkin’s Puma XL, white, reflective topcoat to provide an incredibly durable and reflective finish for decades of protection you can count on.

Framer 2023

Amsterdam